Print…

You Searched For: Chemical Fume Hoods

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.


46  results were found

Refine Results Sort by
SearchResultCount:"46"

Sort Results

List View Easy View

Rate These Search Results

Product Image-10002-752

AtmoSense™ Oxygen Monitor, 115 V

Catalog Number: (10002-752)
Supplier: Labconco
Description: The AtmoSense™ Oxygen monitor is designed for general purpose trace oxygen detection as low as 1 ppm.

Product available on GSA Advantage®


Product Image-470203-214

Cupsink and Turret Kit for Basic™ Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Kit includes a 7.6x15.2cm (3x6") polypropylene cupsink and chrome turret

Product available on GSA Advantage®

Product Image-76045-660

SpillStopper™ Work Surfaces for Protector® ClassMate™ Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Solid epoxy work surfaces are 3.2cm (1<sup>1</sup>/<sub>4</sub>") thick, 65.7cm (25<sup>7</sup>/<sub>8</sub>") deep, and dished to contain spills.

Product available on GSA Advantage®

Product Image-10221-906

Protector® XL™ Floor-Mounted Laboratory Hoods with Horizontal Sashes, Labconco

Supplier: Labconco
Description: Protector XL floor-mounted laboratory hoods with horizontal-sliding sashes are suitable for general chemistry applications and have the dimensions required for over-sized equipment.

UL Listed CSA Certified Product available on GSA Advantage®

Product Image-89523-282

Protector® Stainless Steel Perchloric Acid Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Interior is one piece, Type 316 stainless steel with integral work surface and drainage trough.

Product available on GSA Advantage®

Product Image-CF5-1372-03

REDISHIP Auxiliary Air Chambers, Kewaunee®

Catalog Number: (CF5-1372-03)
Supplier: Kewaunee
Description: These chambers can be added to the top of any Supreme Air fume hood to convert it to an auxiliary air fume hood.

Product available on GSA Advantage®


Product Image-10220-616

Protector® XL™ Floor-Mounted Laboratory Hoods with Vertical Sashes, Labconco

Supplier: Labconco
Description: Testing confirms the Protector XL floor-mounted laboratory hoods with vertical-rising sashes meet the SEFA-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm.

Environmentally Preferable CSA Certified Product available on GSA Advantage®

Product Image-89232-772

Protector® Premier® Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Labconco Protector® Premier® fiberglass fume hoods have a one-piece liner of specially-formulated, fiberglass-reinforced polyester, which offers corrosion and fire resistance and easy clean up.

Environmentally Preferable Product available on GSA Advantage®

Product Image-97044-328

Guardian™ 500 Airflow Monitor with Epoxy-Coated Steel Casing, Labconco®

Supplier: Labconco
Description: The Guardian 500 Airflow Monitor is designed to continuously monitor airflow through Labconco fume hoods and other enclosures

Product Image-470203-136

Basic 47 and 70 Fume Hoods

Supplier: Labconco
Description: Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.<BR><BR>Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.<BR><BR>The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station, <BR><BR>Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.<BR><BR>Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor. <BR><BR>Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.<BR><BR>For assistance, contact your local sales representative

Product Image-30192-104

Canopy Hood, Labconco®

Supplier: Labconco
Description: Specifically designed to solve unique ventilation problems, this canopy hood vents nontoxic materials such as heat, steam, and odors from large or bulky equipment.

Product available on GSA Advantage®

Product Image-10118-510

Protector® PVC Perchloric Acid and Acid Digestion Laboratory Hoods, Labconco®

Supplier: LABCONCO CORPORATION MX
Description: Recommended whenever perchloric acid is used in combination with other corrosive inorganic reagents.

Product available on GSA Advantage®

Product Image-76045-920

Protector® ClassMate™ Laboratory Hoods, Labconco®

Supplier: Labconco
Description: ClassMate™ laboratory hoods are designed to meet the needs of instructional laboratories.

UL Listed Environmentally Preferable CSA Certified Product available on GSA Advantage®

Product Image-77574-086

AtmoSense™ Moisture Monitor

Supplier: Labconco
Description: The AtmoSense™ moisture monitor is designed for general purpose trace moisture detection as low as 0 to 20 ppm.

Product available on GSA Advantage®

Image Unavailable-46610-492

Solid Epoxy Flat Work Surfaces, Labconco®

Supplier: Labconco
Description: Combine with a base stand or cabinet to support Fiberglass 30 and Basic™ Labconco® laboratory hoods.

Product available on GSA Advantage®

Product Image-89000-104

Protector® Demonstration Hoods, Labconco®

Supplier: Labconco
Description: Designed for classroom use, these lightweight hoods feature an epoxy-coated aluminum frame with tempered safety glass front sash, sides, rear baffle, and top.

Product available on GSA Advantage®

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
You must log in to order restricted items. We request that you provide the required business documentation to purchase this product for the first time.

To order chemicals, medical devices, or other restricted products please provide identification that includes your business name and shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number . Acceptable forms of identification are:

  • issued document with your organization's Federal Tax ID Number
  • Government issued document with your organization's Resale Tax ID Number
  • Any other Government ID that includes the business name and address


VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is currently unavailable but limited stock may be available in our extended warehouse network. Please call 1-800-932-5000 and a VWR Customer Service Representative will help you.
17 - 32 of 46
no targeter for Bottom