Print…

You Searched For: I.W. TREMONT CO., INC.


141  results were found

Refine Results Sort by
SearchResultCount:"141"

Sort Results

List View Easy View

Rate These Search Results

Image Unavailable-77590-888

LabExact® Extraction Thimbles, Cellulose

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® high quality cellulose extraction thimbles are available in a variety of dimensions to fit most Soxhlet extraction units.

New Product

Image Unavailable-77590-688

LabExact® CFP44 Quantitative Ashless Cellulose Filter Papers, 3 µm

Supplier: I.W. TREMONT CO., INC.
Description: Very similar to CFP42 but demonstrating a slightly wider retention rate within a similar flow rate.

New Product

Image Unavailable-77591-702

LabExact® Weighing Papers, Nitrogen Free

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® weighing paper is an analytical purity grade non siliconized, nitrogen free paper designed for conveying powder or gelatinous paste samples to and from balances and instruments. Compatable with Kjeldahl digestion and packaged in a convenient dispensor box.

New Product

Image Unavailable-77591-310

LabExact® Moisture Analysis Binderless Glass Microfiber Pads

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® Binderless glass microfiber moisture analysis pads conform to the AOAC standards for binderless glass microfiber moisture analysis pads for food analysis and QA test methods such as moisture content of plastic resins, gels, pastes and semi-solids.

New Product

Image Unavailable-77591-094

LabExact® PTFE Inline Filters, Sterile¹/₄ to ³/₈" Barb Ports

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® easy-to-use sterile and disposable in-line filters contain a hydrophobic PTFE membrane and are ideal for confining and isolating infectious and hazardous material in vacuum systems and venting applications.

New Product

Image Unavailable-77591-092

LabExact® Tri-Layer Syringe Filters with GF/PP Prefilters, Non Sterile

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® disposable non sterile tri-layer (PTFE, nylon/polyamide and PVDF) filtration media syringe filters with glass microfiber and polypropylene prefilter offer increased absorption capacity and loading and are commonly used for general laboratory filtration and filtration of HPLC and GC samples prior to injection in analyzer.

New Product

Image Unavailable-77591-660

LabExact® Grade TSS Glass Microfiber Filter, Prewashed and Dried, Not Tared

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® Pre-washed and dried IW Tremont Grade TSS filters for Total Suspended Solids (TSS) are processed using reagent grade water (RGW) to wash away extraneous fiber per the requirements of the EPA Standard 2540 C, D and E saving time while maintaining your high levels of quality assurance.

New Product

Image Unavailable-77591-612

LabExact® Trupor® PES High Flow, Low Back Pressure Filter Membranes

Supplier: I.W. TREMONT CO., INC.
Description: H&V Trupor® PES membranes utilize nanoscale technology in a composite design to achieve precisely regulated porosities with higher loading capacity and faster flow. No adhesives are utilized, which significantly reduces trace extractables.

New Product

Product Image-77590-362

LabExact® Grade A83 0.5 µm Binderless Glass Microfiber Filters

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® Grade A83 nano-scale glass microfiber has the loading capacity of a binderless glass microfiber filter with the tight, regulated pore size of a membrane. This specialty grade has a particle retention of 0.5 µm.

New Product

Image Unavailable-77590-946

LabExact® Nylon Syringe Filters, Non Sterile

Supplier: I.W. TREMONT CO., INC.
Description: Nylon syringe filters are recommended for filtration of aqueous or organic/aqueous medium polar liquids and commonly used for general laboratory filtration and filtration of HPLC and GC samples prior to injection. The non-sterile disposable syringe filters with 4 mm diameter are ideal for processing small samples.

New Product

Image Unavailable-77591-498

LabExact® PTFE Membranes, Non sterile, Hydrophobic

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® Polytetrafluoroethylene (PTFE) Membrane is supported with a polypropylene (PP) scrim for easier handling. This scrim is bonded using a unique technique utilizing no bonding agent for purity, chemical compatibility, and lower extractables.

New Product

Image Unavailable-77590-608

LabExact® CFP40 Quantitative Ashless Cellulose Filter Papers, 8 µm

Supplier: I.W. TREMONT CO., INC.
Description: Demonstrating medium retention and flow rates, this media is widely used in many general quantitative procedures in both liquid and gas.

New Product

Image Unavailable-77591-048

LabExact® Nylon Syringe Filters with Glass Fiber Prefilter

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® disposable non-sterile nylon/polyamide filtration media syringe filters are hydrophilic with a 1 µm glass microfiber prefilter that raises absorption capacity and loading.

New Product

Image Unavailable-77591-060

LabExact® PES Syringe Filters, Non Sterile

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® disposable non-sterile PES/polyethersulfone hydrophilic filtration media syringe filters have high filtration flow rates and an inherently low affinity for proteins and low extractables ideal for introduction of additives into tissue culture vessel.

New Product

Image Unavailable-77591-666

LabExact® Grade TSS Glass Fiber Filter, Prewashed, Dried, Preweighed for Standard Methods TSS

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® Total Suspended Solids (TSS) filters are processed to US EPA Standard Method 2540 C, D and E, washed using reagent grade water, dried, desiccated and weighed to 4 decimal place resolution.

New Product

Product Image-77591-678

LabExact® Grade VSS 1.5 µm Binderless Glass Microfiber Filters

Supplier: I.W. TREMONT CO., INC.
Description: LabExact® Grade VSS is a binder-free material manufactured using a proprietary glass chemistry which permits usage in high heat applications beyond typical borosilicate glass blends. Ideally suited for determination of fixed and volatile solids ignited at 550 °C Method 2540E.

New Product

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
You must log in to order restricted items. We request that you provide the required business documentation to purchase this product for the first time.

To order chemicals, medical devices, or other restricted products please provide identification that includes your business name and shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number . Acceptable forms of identification are:

  • issued document with your organization's Federal Tax ID Number
  • Government issued document with your organization's Resale Tax ID Number
  • Any other Government ID that includes the business name and address


VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is currently unavailable but limited stock may be available in our extended warehouse network. Please call 1-800-932-5000 and a VWR Customer Service Representative will help you.
1 - 16 of 141
no targeter for Bottom