You Searched For: OPTIMIZE TECHNOLOGIES, INC.

Catalog Number: (97056-472)

Supplier: Optimize

Description: The reusable holder are only slightly larger than a standard HPLC fitting. The slim architecture allows it to easily fit into crowded instrument compartments or
to connect directly to tightly-spaced injection ports.

Supplier: Optimize

Description: Modern UHPLC and UHPLC/MS instrumentation pushes the envelope in fluid handling with tiny passages and extremely high pressures. At any time, an unprotected system is a stray 1 μm seal fragment away from failure, loss of data continuity and subsequent troubleshooting and repair. The best assurance against this costly prospect comes from safeguarding your system with thorough filtration.

Catalog Number: (89522-340)

Supplier: Optimize

Description: These lamps are compatible with Agilent/HP systems.

Supplier: Optimize

Description: The cartridge-based EXP® analytical column system is designed for superior chromatographic analysis with each injection rated for routine use up to 20000 psi.

Supplier: Optimize

Description: A broad selection of lamps for OEM HPLC detectors.

Supplier: Optimize

Description: The OPTI-TRAP™ is a bi-directional trap cartridge system which is used individually or in a series for sample concentration and purification.

Supplier: Optimize

Description: The EXP Fitting System is the premier adjustable nut and ferrule compression fitting for extreme high-pressure connections between ¹/₃₂" or ¹/₁₆" tubing and any 6-32, 6-40 or 10-32 port.

Supplier: Optimize

Description: Preassembled check valve cartridges conveniently insert into a reusable housing and function in either the inlet or outlet position

Catalog Number: (77100-310)

Supplier: Optimize

Description: If you are already using our OPTI-LYNX™ Guard Column/Pre-Column Filter Kits and want to use OPTI-LYNX™ at the bottom of the column as well, upgrade with this kit.

Supplier: Optimize

Description: The entire EXP®2 stem trap and reusable holder are only slightly larger than a standard HPLC fitting. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports.

Supplier: Optimize

Description: The OPTI-PAK®'s unique hardware design integrates a PEEK holder with an auto-adjusting stem which provides a fluid interface with any 10-32 standard injector port, and guarantees a zero-dead-volume connection despite variances in tube stop depth.

Supplier: Optimize

Description: The patented hand-tight EXP® trap column is rated for use at 20000+ psi (1400+ bar). This unique design connects directly to any injection valve (with 10-32 threads) or in-line with ¹/₁₆" stainless tubing for unparalleled convenience and efficiency.

Supplier: Optimize

Description: The OPTI-LYNX™ guard column is a high performance, cartridge-based guard system, suitable for use with any analytical column.

Supplier: Optimize

Description: For volume critical filtering needs, optimize offers the OPTI-SOLV micro filter.

Catalog Number: (77100-340)

Supplier: Optimize

Description: Column plugs can be placed on OPTI-LYNX™ bayonet connectors to seal and protect fluid interfaces, packed beds, frits, and more.

Supplier: Optimize

Description: Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.