Print…

You Searched For: LABCONCO CORPORATION


24  results were found

Refine Results Sort by
SearchResultCount:"24"

Sort Results

List View Easy View

Rate These Search Results

Product Image-77296-332

Blowers for Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Fiberglass blowers are recommended for fume hood exhaust systems in moderate to highly corrosive conditions

Product Image-46610-470

Protector® Standard Storage Cabinets, Labconco®

Supplier: Labconco
Description: Standard cabinets support Labconco® laboratory hoods and can be used for storage of small laboratory instruments.

Product available on GSA Advantage®

Product Image-46610-464

Protector® Acid Storage Cabinets, Labconco®

Supplier: Labconco
Description: Safely store and vent acids and other highly corrosive liquids.

Product available on GSA Advantage®

Image Unavailable-89033-090

Accessories for Protector® Solvent Storage Cabinets, Labconco

Catalog Number: (89033-090)
Supplier: Labconco
Description: Includes 1.5 inch diameter metal flexible hose, two hose clamps and 2 inch NPT x 1.5 inch slip-fit outlet adapter.

Product available on GSA Advantage®


Image Unavailable-82010-718

Accessories for XPert™ Bulk Powder Enclosures, Labconco

Supplier: Labconco
Description: For 15.2cm I.D. hose. An accessory for use with XPert* Balance Enclosures, Protector* XVS Ventilation Stations, and Protector Workstations.

Product available on GSA Advantage®

Product Image-89260-056

REDISHIP Protector® Premier® Laboratory Hoods and REDISHIP SpillStopper™ Work Surfaces, Labconco®

Supplier: Labconco
Description: Popular models of Protector® Premier® Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment

Environmentally Preferable Product available on GSA Advantage®

Image Unavailable-89238-200

Protector® Base Cabinet Filler Panels, Labconco®

Supplier: Labconco
Description: One 8" filler panel is included with each storage cabinet to extend cabinet depth to 30" and to enclose the utility chase behind the cabinet.

Product available on GSA Advantage®

Product Image-89260-096

Protector® Fume Hood Airflow Monitors, Service Fixture Kits, and Duplex Receptacle Kits, Labconco

Supplier: Labconco
Description: There are many accessories available for customizing Protector® Laboratory Hoods including Service Fixture Kits, Duplex Receptacle Kits and Guardian™ Airflow Monitors.

Product available on GSA Advantage®

Product Image-89260-074

Accessories for REDISHIP Protector® XStream® Laboratory Hoods and REDISHIP SpillStopper™ Work Surfaces, Labconco

Supplier: Labconco
Description: Black solid epoxy, 72inch w x 36inch l x 1.25inch thick. Includes left rear cutout, cupsink and cupsink cover. EA.

Product available on GSA Advantage®

Image Unavailable-82010-690

Accessories for XPert™ Balance Enclosures, Labconco

Catalog Number: (82010-690)
Supplier: Labconco
Description: Molded from special formulation of epoxy resins to withstand chemicals. Dished and contoured to conform the interior liner of 0.6m (2ft.) Protector* XVS Ventilation Station to contain spills. Radiused front edge enhances containment.

Product available on GSA Advantage®


Product Image-82010-692

Accessories for Protector® Demonstration Hoods, Labconco

Catalog Number: (82010-692)
Supplier: Labconco
Description: Molded from special formulation of epoxy resins to withstand chemicals. Dished and contoured to conform the interior liner of 0.9m (3ft.) Protector* XVS Ventilation Station to contain spills. Radiused front edge enhances containment.

Product available on GSA Advantage®


Product Image-89004-462

XPert™ Balance Enclosures, Labconco®

Supplier: Labconco
Description: These low-profile enclosures provide user protection by keeping powders, particulates, and fumes contained during weighing procedures

Product available on GSA Advantage®

Product Image-46610-460

Protector® Solvent Storage Cabinets, Labconco®

Supplier: Labconco
Description: Safely store and vent solvents and other highly flammable liquids.

Product available on GSA Advantage®

Product Image-77574-674

Logic® Class II, Type A2 Biosafety Cabinets

Supplier: Labconco
Description: <p>REDISHIP Logic Class II, Type A2 Biosafety Cabinets with 10" sash, right-side service fixture, UV, right and left side Vacu-Pass Portals and base stand, 115V, 60Hz</p>

New Product

Product Image-82010-632

FilterMate™ Portable Exhausters, Labconco®

Catalog Number: (82010-632)
Supplier: Labconco
Description: Portable exhausters for use with XPert™ balance enclosures and weigh boxes, Precise™ HEPA-filtered glove boxes, and Protector™ XVS ventilation stations, demonstration hoods, and workstations. Exhausters use carbon and/or HEPA filters to remove hazardous powders, particulates, or vapors from the exhaust air stream, returning filtered air to the environment. No ducting to the outside is required.

Product available on GSA Advantage®


Product Image-89260-070

Accessories for REDISHIP Protector® Premier® Laboratory Hoods and REDISHIP SpillStopper™ Work Surfaces, Labconco

Supplier: Labconco
Description: Black solid epoxy, 48inch w x 30inch l x 1.25inch thick. Includes left rear cutout, cupsink and cupsink cover. EA.

Product available on GSA Advantage®

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
You must log in to order restricted items. We request that you provide the required business documentation to purchase this product for the first time.

To order chemicals, medical devices, or other restricted products please provide identification that includes your business name and shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number . Acceptable forms of identification are:

  • issued document with your organization's Federal Tax ID Number
  • Government issued document with your organization's Resale Tax ID Number
  • Any other Government ID that includes the business name and address


VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is currently unavailable but limited stock may be available in our extended warehouse network. Please call 1-800-932-5000 and a VWR Customer Service Representative will help you.
1 - 16 of 24
no targeter for Bottom