You Searched For: Electron Microscopy Sciences

Catalog Number: (100502-220)

Supplier: Electron Microscopy Sciences

Description: Type 3 short, thin tips, 110 mm.

Catalog Number: (100502-162)

Supplier: Electron Microscopy Sciences

Description: Clips on to any eyeglass frame leaving hands free.

Supplier: Electron Microscopy Sciences

Description: Thermal Transfer Cryo-Tags are a reliable and convenient way to identify samples with text or a barcode on microtubes, microplates, bottles and other laboratory containers. Pre-cut, peel-off labels designed for use in thermal transfer printers. Print popular barcode formats for fast and easy sample identification. Works with all thermal transfer printers.

Supplier: Electron Microscopy Sciences

Description: Use sealing films to eliminate well-to-well contamination, microbial and viral contamination, and sample spillage. Non breathable membranes prevent evaporation.

Supplier: Electron Microscopy Sciences

Description: Polypropylene rack has 96 wells to accommodate 0.5 mL micro centrifuge tubes on one side, or 96 wells for 1.5 to 2.0 mL micro centrifuge tubes on the other side. Arranged in standard 8 x 12 array. Handy lid snaps into place in the tabs on each end of rack. Grid lines are molded on the side of the rack that accommodates the smaller tubes making it easier to see the wells. Raised rings are molded on the opposite side of the rack making it easier to replace the 1.5 to 2.0 mL tubes from those wells. Rack measures 9.75 x 4.75 x 1.875".

Supplier: Electron Microscopy Sciences

Description: Each module of the Rota-Rack for large tubes holds two 50 mL tubes, eight 15 mL tubes, six 20 mm tubes, or ten 10-13 mm tubes

Catalog Number: (102094-608)

Supplier: Electron Microscopy Sciences

Description: Mall Probe: 6” long, Chrome plated with one blunt bent end and hexagonal shape handle
Probe with Eye: Stainless steel, 5” long, 2 mm diameter. Flat one end with eye.
Huber Probe: Chrome Plated. 6” long, one blunt bent end, and one chisel finish on the other end
Inoculating Loop/Needle: Nichrome wire. An 8" aluminum handle with a 3" nichrome wire, 25 gauge. Loop outside diameter is 4 mm. Loop inside diameter is 2.5 mm. Available with a loop or a needle.

Catalog Number: (102090-930)

Supplier: Electron Microscopy Sciences

Description: The AMS tables incorporate Sorbothane isolators, giving excellent isolation with a natural frequency of less than 7 Hz.

Catalog Number: (102681-284)

Supplier: Electron Microscopy Sciences

Description: Custom tip designed from tungsten. Tip radius is < 0.5 µm with 6° taper angle for maximum lifetime service. Compatible with Short-Cut™ system for direct conversion to TEM grid

Supplier: Electron Microscopy Sciences

Description: Custom 4-post lift-out grids for in-situ lift-out. It include multiple indexed mounting locations, two with vertical bars attachment surfaces and two with 'V' shaped alignment surfaces.

Catalog Number: (102681-290)

Supplier: Electron Microscopy Sciences

Description: Custom copper lift-out grids specifically designed for in-situ lift-out.

Catalog Number: (102091-084)

Supplier: Electron Microscopy Sciences

Description: The Histo-Pro 150 offers superior operating convenience for tissue embedding processes in a modular ergonomic design.

Catalog Number: (102098-306)

Supplier: Electron Microscopy Sciences

Description: This 50 mm in diameter multi pin holder is designed to save time. It is made from machined aluminum with stainless steel Allen wrench screws.

Catalog Number: (102101-074)

Supplier: Electron Microscopy Sciences

Description: A formvar film stabilized with a thin film of Silicone monoxide.

Catalog Number: (102096-364)

Supplier: Electron Microscopy Sciences

Description: Ideal for ice pans and ice buckets for use when only a small number of microtubes are required.

Catalog Number: (103301-900)

Supplier: Electron Microscopy Sciences

Description: Hitachi SEM mounts are complete line of SEM specimen mounts are made from lathe finished ultra-pure aluminum.