You Searched For: INKSMITH+LIMITED+SE


71,563  results were found

SearchResultCount:"71563"

Sort Results

List View Easy View

Rate These Search Results

Supplier: Ace Glass
Description: Single outlet, secondary temperature control safety device for applications where temperature overshoot will cause dangerous conditions

Catalog Number: (89139-700)
Supplier: Biotium
Description: SR101-PEO12 SE (Sulforhodamine 101-PEO12-propionic acid succinimydyl ester; Texas Red®-PEO12 SE) has an approximately 47 Angstrom water-soluble PEG spacer that separates the dye from the amine-reactive SE group.


Supplier: SPEX CERTIPREP LLC
Description: CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.

The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.

US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:

• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements

CLP ISM 01.2 & ILM 05.3 Standards for ICP
For ILM 05.3, a standard must be run at the Contract Required Detection Limits (CRDL). To verify linearity near the CRQL, this standard is analyzed at the beginning of the analysis run, after the ICV/ICB and before the ICSA and ICSAB. In addition, this standard must be run at a frequency of not less than 20 analytical samples and at the end of the analysis run, followed by the ICSA/ISCAB. The sequence order is CCV, CCB, CRI, ICSA, ICSAB, CCV, and CCB. For ISM 01.2, at least one of your calibration standards must be at the Contract Required Detection Limit (CRDL). This standard, when diluted, can be used as a calibration standard to fulfill this requirement.

Catalog Number: (470328-714)
Supplier: Diversified Woodcrafts
Description: Seat, Self braking casters for SE chairs set5


Supplier: Saint Gobain Performance Plastics
Description: Chemically resistant and non-contaminating, Versilon™ SE-200 chemical transfer tubing provides the outstanding clarity and flexibility of Tygon® tubing combined with an inert fluoropolymer liner.
Catalog Number: (89139-680)
Supplier: Biotium
Description: 5-ROX-PEO8 SE (full name: 5-Carboxy-X-rhodamine-PEO8-propionate, succinimidyl ester) has an approximately 32 Angstrom water-soluble PEG spacer that separates the red fluorescent ROX dye and the amine-reactive SE group.


Supplier: Ace Glass
Description: Two independent temperature controllers in one cabinet.

Supplier: Thermo Scientific Chemicals
Description: Molecular Formula: Se in 5% HNO3
Physical Form: Liquid
UN No.: 3264
MDL No.: MFCD00134090
Supplier: Thermo Scientific Chemicals
Description: Molecular Formula: Se in 5% HNO3
Physical Form: Liquid
UN No.: 3264
MDL No.: MFCD00134090
Catalog Number: (103011-236)
Supplier: Anaspec Inc
Description: HiLyte™ Fluor 405 is a blue fluorescent dye with Ex/Em = 404/428 nm, spectrally similar to Alexa Fluor™ 405 and DyLight Fluor™ 405 dyes.


Supplier: Techcon Systems
Description: Tips have a polypropylene hub and stainless steel cannula

Supplier: Thermo Scientific Chemicals
Description: Molecular Formula: Se in 5% HNO3
Physical Form: Liquid
UN No.: 3264
MDL No.: MFCD00134090
Catalog Number: (77070-006)
Supplier: ANTIBODIES.COM LLC
Description: Mouse monoclonal (se-01) antibody to Salmonella LPS for WB and ELISA with samples derived from Salmonella enteritidis and Salmonella typhimurium.


Supplier: INKSMITH LIMITED SE
Description: Accessories for Inksmith Cubicon Single Plus 3D Printers

Supplier: INKSMITH LIMITED SE
Description: Accessories for InkSmith Mako Laser Cutter (60 Watt)

Catalog Number: (CA97013-324)
Supplier: PerkinElmer
Description: System 2 Electrodeless Discharge Lamps (EDLs) provide the optimized spectral output needed to get the maximum performance from PerkinElmer® Atomic Absorption (AA) spectrometers.


Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
You must log in to order restricted items. We request that you provide the required business documentation to purchase this product for the first time.

To order chemicals, medical devices, or other restricted products please provide identification that includes your business name and shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number . Acceptable forms of identification are:

  • issued document with your organization's Federal Tax ID Number
  • Government issued document with your organization's Resale Tax ID Number
  • Any other Government ID that includes the business name and address


VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is currently unavailable but limited stock may be available in our extended warehouse network. Please call 1-800-932-5000 and a VWR Customer Service Representative will help you.
113 - 128 of 71,563
no targeter for Bottom