Print…

You Searched For: Heaters

Heaters use the best methods to evenly increase the temperature for samples contained in test tubes, beakers, flasks, and crucibles. Spirit lamps, gas burners, heating mantles, hot air dryers, hotplates apparatuses may use gas or electric power to generate heat required. Ceramic and insulated steel designs provide stable heating sources while still delivering on user safety or lab efficiency. The selection of heaters will accommodate any vessel being used and the procedure requirements.

Heaters use the best methods to evenly increase the temperature for samples contained in test tubes, beakers, flasks, and crucibles. Spirit lamps, gas burners, heating mantles, hot air dryers, hotplates apparatuses may use gas or electric power to generate heat required. Ceramic and insulated steel designs provide stable heating sources while still delivering on user safety or lab efficiency. The selection of heaters will accommodate any vessel being used and the procedure requirements.


732  results were found

Refine Results Sort by

Sort Results

List View Easy View
SearchResultCount:"732"

Rate These Search Results

Product Image-12620-980

VWR* Dylatherm* Hot Plate

Description: Large 16.5 cm Diameter Cast Aluminum Top Plate Heats up to 400°C (752°F) Built-in Support Rod Holder VWR Two-Year Limited Parts and Labor Warranty 230V
Catalog Number: 12620-980
Supplier: VWR International

UL Listed CE Compliant


Product Image-89038-548

VWR Bunsen Burner

Description: Designed to burn all gases in large volume with short, wide, uniform flame. Special micrometer needle valve regulates gas. Safety cap prevents dangerous backflashes. Plated, injector-shaped 2.9mm venturi tube. Inlet O.D.: 10mm. Output: 3800btu. Overall height: 203mm.
Catalog Number: 89038-548
Supplier: VWR International
Product Image-89038-544

VWR Bunsen Burner

Description: The 8.6cm Meker grid top forms consistent blue cones of flame. Safety cap design eliminates back-flashes. Die-cast base and venturi tube are nickel plated. 38mm grid diameter. BTU output: 800-1200. Fuel: Natural gas.
Catalog Number: 89038-544
Supplier: VWR International

Certificates


Product Image-89038-546

VWR Bunsen Burner

Description: The 8.6cm grid top forms consistent blue cones of flame. Safety cap design eliminates back-flashes. Die-cast base and venturi tube are nickel plated. 38mm grid diameter. BTU output: 2000-3200. Fuel: Liquid propane.
Catalog Number: 89038-546
Supplier: VWR International

Certificates


Product Image-89038-538

VWR Bunsen Burnerr

Description: For separate control of flame temperature and height. Burner provides clear flame from 1.3-30.5cm. Gas intake is controlled by a fine-pitch brass needle valve. Height: 8.9cm. BTU output: 2000-3200. Fuel: Liquid propane.
Catalog Number: 89038-538
Supplier: VWR International

Certificates


Product Image-89038-530

VWR Bunsen Burner

Description: For general lab use. Natural gas fuel. Flame stabilizer provides a steady, intense flame. Die-cast, nickel plated base with aluminum mixing tube, 8mm gas inlet and air regulator. Height: 156mm. BTU output: 800-1200.
Catalog Number: 89038-530
Supplier: VWR International

Certificates


Product Image-89038-536

VWR Bunsen Burner

Description: For separate control of flame temperature and height. Burner provides clear flame from 1.3-30.5cm. Gas intake is controlled by a fine-pitch brass needle valve. Height: 8.9cm. BTU output: 800 1200. Fuel: Natural gas.
Catalog Number: 89038-536
Supplier: VWR International

Certificates


Product Image-89038-532

VWR Bunsen Burner

Description: For general lab use. Liquid propane fuel. Flame stabilizer provides a steady, intense flame. Die-cast, nickel plated base with aluminum mixing tube, 8mm gas inlet and air regulator. Height: 156mm. BTU output: 2000-3200.
Catalog Number: 89038-532
Supplier: VWR International

Certificates


Product Image-89038-526

VWR Bunsen Burner

Description: For micro procedures and analyses. Die-cast, nickel plated zinc-alloy base with 8mm gas inlet, and 13mm aluminum mixing tube. Adjustable orifice. Needle valve air/gas adjustment. BTU output: 800-1200. Fuel type: Natural gas.
Catalog Number: 89038-526
Supplier: VWR International

Certificates


Product Image-89038-540

VWR Bunsen Burner

Description: For separate control of flame temperature and height. Burner provides clear flame from 1.3-30.5cm. Gas intake is controlled by a fine-pitch brass needle valve. Height: 8.9cm. BTU output: 300-800. Fuel: Artificial gas.
Catalog Number: 89038-540
Supplier: VWR International
Product Image-10153-300

VWR* mini hotplate

Description: VWR* mini hotplate, 5x5inch aluminum top plate. Temperature to 400degree celcius.capacity 1000ml.basic adjustment knob with 1 to 10 dial markings. Built in support rod holder.includes.tuv listed. 120v
Catalog Number: 10153-300
Supplier: VWR International
Product Image-10153-312

Plate

Description: Plate, VWR* mini fixed temperature 5x5inch aluminum top hotplate. Temperature 400degree celcius.on off rocker switch.tuv listed. 120v
Catalog Number: 10153-312
Supplier: VWR International
Product Image-76549-914

VWR HOTPLATE DIG 7X7 115V

Catalog Number: 76549-914
Supplier: VWR International
Product Image-12620-978

VWR* Dylatherm* Hot Plate 120V

Description: Large 16.5 cm Diameter Cast Aluminum Top Plate Heats up to 400°C (752°F) Built-in Support Rod Holder VWR Two-Year Limited Parts and Labor Warranty
Catalog Number: 12620-978
Supplier: VWR International

Certificates UL Listed cUL Listed


Product Image-89038-528

VWR Bunsen Burner

Description: Artificial gas type. Plated, die-cast alloy bases, aluminum mixing tubes, and serrated gas inlet connections. Mixing tube O.D.: 11mm. Inlet O.D.: 8mm. Output: 300-800btu. Overall height: 137mm.
Catalog Number: 89038-528
Supplier: VWR International

Certificates


Product Image-76447-036

Vwr* Advanced top Hotplate, Material: Ceramic, Voltage: 120V, deliver accurate and repeatable results, The units are microprocessor controlled and have a digital display for temperature and speed. Control panel features an easy-to-use knobs which allow users to dial in adjustments, Size: 7x7in

Description: Vwr* Advanced top Hotplate, Material: Ceramic, Voltage: 120V, deliver accurate and repeatable results, The units are microprocessor controlled and have a digital display for temperature and speed. Control panel features an easy-to-use knobs which allow users to dial in adjustments, Size: 7x7in
Catalog Number: 76447-036
Supplier: VWR International

Environmentally Preferable


1 - 16 of 732