Print…

You Searched For: Labconco


4,179  results were found

Refine Results Sort by

Sort Results

List View Easy View
SearchResultCount:"4179"

Rate These Search Results

Image Unavailable-97006-616

Carbon filter

Description: traps non-volatile nuisance odors and vapors from samples or minute quantities of formaldehyde. Two filters are required for 5’ wide XPert Filtered Systems.
Catalog Number: 97006-616
Supplier: Labconco
Image Unavailable-93000-614

Work Surface For Xpert* Filtered Balance Stations and Systems

Description: Made of stainless steel and includes spill trough. 5' wide by 35.7" deep.
Catalog Number: 93000-614
Supplier: Labconco
Image Unavailable-93000-616

Work Surface For Xpert* Filtered Balance Stations and Systems

Description: Made of stainless steel and includes spill trough. 6' wide By 29" deep.
Catalog Number: 93000-616
Supplier: Labconco
Image Unavailable-93000-612

Work Surface For Xpert* Filtered Balance Stations and Systems

Description: Made of stainless steel and includes spill trough. 5' wide by 29" deep.
Catalog Number: 93000-612
Supplier: Labconco
Image Unavailable-93000-618

Work Surface For Xpert* Filtered Balance Stations and Systems

Description: Made of stainless steel and includes spill trough. 6' wide by 35.7" deep.
Catalog Number: 93000-618
Supplier: Labconco
Product Image-97010-022

Seismic Support Bracket Kit, for Telescoping Base Stands with Fixed Feet

Description: Seismic Support Bracket Kit, for Telescoping Base Stands with Fixed Feet
Catalog Number: 97010-022
Supplier: Labconco
Product Image-46610-764

Universal service fixtures

Description: Universal service fixtures
Catalog Number: 46610-764
Supplier: Labconco
Product Image-10018-928

Work Surface

Description: Work Surface
Catalog Number: 10018-928
Supplier: Labconco
Product Image-75841-002

Evaporator, Centrifugal, Block for RapidVap® Vertex™ Dry Evaporator, Labconco

Description: Evaporator, Centrifugal, Block for RapidVap® Vertex™ Dry Evaporator, Labconco
Catalog Number: 75841-002
Supplier: Labconco
Product Image-76045-670

Work Surfaces for Protector ClassMate Hood 5 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-670
Supplier: Labconco
Product Image-76045-660

Work Surfaces for Protector ClassMate Hood 4 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-660
Supplier: Labconco
Product Image-76045-666

Work Surfaces for Protector ClassMate Hood 5 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-666
Supplier: Labconco
Product Image-76045-668

Work Surfaces for Protector ClassMate Hood 5 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-668
Supplier: Labconco
Product Image-76045-678

Work Surfaces for Protector ClassMate Hood 5 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear/Right side pre-cut 6inx3in oval cutouts
Catalog Number: 76045-678
Supplier: Labconco
Product Image-76045-680

Work Surfaces for Protector ClassMate Hood 5 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side/Right rear pre-cut 6inx3in oval cutouts
Catalog Number: 76045-680
Supplier: Labconco
Product Image-76045-658

Work Surfaces for Protector ClassMate Hood 4 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-658
Supplier: Labconco
337 - 352 of 4,179