You Searched For: 2,4-Dichlorophenyl+isocyanate

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.


102  results were found

Sort Results

List View Easy View
SearchResultCount:"102"
Description: Certified By The Japan Petroleum Institute, High Level (Nickel Content 22Mass Ppm And Vanadium Content 53Mass Ppm). ,
Catalog Number: TCS0265-100ML
Supplier: TCI America

SDS


Description: Certified By The Japan Petroleum Institute, Sulfur Content 0.5Mass% Level. ,
Catalog Number: TCS0226-100ML
Supplier: TCI America

SDS


Description: Certified by the japan petroleum institute, nitrogen content 0.1mass[perCent] level. ,
Catalog Number: TCS0250-20ML
Supplier: TCI America

SDS


Description: Certified By The Japan Petroleum Institute, Sulfur Content 100Mass Ppm Level. ,
Catalog Number: TCS0434-100ML
Supplier: TCI America

SDS


Description: Form: Liquid
Catalog Number: TCS0556-250ML
Supplier: TCI America

SDS


Description: This reference material is used to confirm the peak separation. It is a mixture of the following components shown in Table below.
Catalog Number: TCS0710-1SET
Supplier: TCI America

New Product


Description: Two components standard in in methanol.
Catalog Number: RCRV019034-1R
Supplier: Ricca Chemical


Description: Reference Material of Diluting Gasoline, Certified by The Japan Petroleum Institute, TCI America
Catalog Number: TCS0712-500ML
Supplier: TCI America

New Product


Description: Marine Oil FAME Mix
Catalog Number: 75835-338
Supplier: Restek


Description: The solvents consists of (C6) n-hexane (290 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), 2-hexanone (50 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml), tetralin (100 μg/ml), trichloroethene (80 μg/ml).
Catalog Number: 75835-464
Supplier: Restek

Description: The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.
Catalog Number: 75835-680
Supplier: Restek


Description: Unweathered Petrochemical Standards
Catalog Number: RK31261
Supplier: Restek


Description: This contains n-nonatriacontane (C39).
Catalog Number: 75834-828
Supplier: Restek


Description: Standard Certified Aromatics in Gasoline, (16 components), VOA MIX, Concentration in Solvent: 5, 500 ppm gasoline in P and T methanol, Storage: 0 degree C or colder, Volume: 1mL/ampule.
Catalog Number: 75834-400
Supplier: Restek


Description: Standard is packaged in methylene chloride at a concentration of 5000 µg/mL in a 1 mL ampoule.
Catalog Number: RK31093
Supplier: Restek

SDS


Description: Standards are packaged in acetone at a concentration of 2000 µg/mL in a 1 mL ampoule.
Catalog Number: RK31066
Supplier: Restek

SDS